Dealer / 대리점 Call Back / 상담 요청 Catalogues / 카탈로그 다운로드 Service & Support
  • India
    • ASIA PACIFIC
      • Bangladesh
      • Brunei
      • Hongkong
      • India
      • Mauritius
      • Myanmar
      • Malaysia
      • Madagascar
      • Maldives
      • Nepal
      • Reunion Island
      • Seychelles
      • Singapore
      • Sri lanka
      • South Korea
      • Thailand
      • Vietnam
    • MIDDLE EAST
      • Bahrain
      • Iraq
      • Kuwait
      • Jordan
      • Qatar
      • Oman
      • Saudi Arabia
      • United Arab Emirates
    • AFRICA
      • Botswana
      • Burundi
      • Cameroon
      • Congo
      • Ethiopia
      • Ghana
      • Ivory Coast
      • Kenya
      • Liberia
      • Morocco
      • Mozambique
      • Malawi
      • Namibia
      • Nigeria
      • Rwanda
      • Republic of congo
      • Sierra leone
      • South Africa
      • Tanzania
      • Tunisia
      • Uganda
      • Zanzibar
      • Zambia
    • EUROPE
      • Italy
      • France
      • Greece
      • Malta
      • Poland
      • Portugal
      • Russia
      • Ukraine
      • UK
Jaquar South korea
  • 욕실
    Close
    욕실
    • 수도꼭지
    • 위생 도기
    • 샤워기
    • 플러싱 시스템
    • 샤워 인클로저
      • Bathscreen
    • 월풀
    • 욕조
    • 스파
    • 사우나
    • 증기 솔루션
    • 샤워 패널
    • 액세서리
  • Jaquar World
    • Home >>
    • 욕실 >>
    • 수도꼭지 >>
    • 콘티넨탈 프라임
    Product Filters

    선택 옵션

    면적
    장착
    범위
    모양

    콘티넨탈 프라임

    필터
    정렬
    Picture of 싱글 레버 세면대 믹서

    싱글 레버 세면대 믹서

    제품 코드 : COP-CHR-001BPM
    가격 문의
    Picture of 싱글 레버 세면대 믹서 (클릭클락 배수 포함)

    싱글 레버 세면대 믹서 (클릭클락 배수 포함)

    제품 코드 : COP-CHR-001BPMCLW
    가격 문의
    Picture of 팝업 배수 포함 싱글 레버 세면대 믹서

    팝업 배수 포함 싱글 레버 세면대 믹서

    제품 코드 : COP-CHR-051BPM
    가격 문의
    Picture of 싱글 레버 하이넥 세면대 수전

    싱글 레버 하이넥 세면대 수전

    제품 코드 : COP-CHR-005BPM
    가격 문의
    Picture of 싱글 레버 고유량 매립형 다이버터 노출 파트 키트

    싱글 레버 고유량 매립형 다이버터 노출 파트 키트

    제품 코드 : COP-CHR-079NKPM
    가격 문의
    Picture of 싱글 레버 매립형 디버터 노출 파트 키트

    싱글 레버 매립형 디버터 노출 파트 키트

    제품 코드 : COP-CHR-065MKPM
    가격 문의
    Picture of 싱글 레버 매립형 수동 밸브 노출부

    싱글 레버 매립형 수동 밸브 노출부

    제품 코드 : COP-CHR-233NKPM
    가격 문의
    Picture of 싱글 레버 욕조 & 샤워 믹서

    싱글 레버 욕조 & 샤워 믹서

    제품 코드 : COP-CHR-119PM
    가격 문의
    Picture of 싱글 레버 매립형 수동 밸브 노출 파트 키트

    싱글 레버 매립형 수동 밸브 노출 파트 키트

    제품 코드 : COP-CHR-227KPM
    가격 문의
    Picture of 싱글 레버 매립형 다이버터 노출 파트 키트

    싱글 레버 매립형 다이버터 노출 파트 키트

    제품 코드 : COP-CHR-055KPM
    가격 문의
    Picture of 싱글 레버 샤워 믹서

    싱글 레버 샤워 믹서

    제품 코드 : COP-CHR-145PM
    가격 문의
    Picture of 싱글 레버 샤워 믹서

    싱글 레버 샤워 믹서

    제품 코드 : COP-CHR-149PM
    가격 문의
    • Page 1 of 3 (32 total)
    • 1
    • 2
    • 3
    • Next

    Explore Continental Prime Bathroom Faucets

    Choosing a bathroom faucet involves balancing appearance, installation requirements and everyday usability. The Continental Prime collection by Jaquar includes a range of basin and bathing fittings, from single-lever basin mixers and high-neck basin mixers to bath and shower mixers, shower mixers, bidet mixers and in-wall components.

    The collection provides options for different bathroom layouts and plumbing arrangements. A single-lever basin mixer may suit a conventional washbasin, while a high-neck model can be considered for selected countertop basin installations. For bathing areas, the range includes mixers and components that need to be selected according to the planned shower or bathtub configuration.

    Continental Prime also includes different basin waste arrangements and exposed components for in-wall systems. These distinctions matter when specifying products for a new bathroom or replacing existing fittings. Confirming the product code, mounting method and required components helps ensure that the selected tap suits the installation.

    Explore the wider faucet collection to compare available tap types and applications.

    Understanding the Continental Prime Range

    Continental Prime covers several bathroom applications. Its product selection includes single-lever basin mixers, high-neck basin mixers, bath and shower mixers, shower mixers, bidet mixers and exposed parts for selected in-wall valve and diverter arrangements. The collection also includes basin mixer variants with different waste options.

    This variety makes it important to identify the intended use before selecting a product. Basin mixers, bidet mixers and shower controls perform different functions and require different installation arrangements. Even within one category, product codes can indicate differences in waste components, mounting or configuration.

    Review the exact product listing and technical details rather than relying only on the product name. This is particularly important when a fitting is being specified for a project with an existing plumbing layout.

    Continental Prime Basin Mixers

    Single-Lever Basin Mixer

    A single-lever basin mixer allows the user to adjust water flow and temperature using one lever. It offers a straightforward operating arrangement and can help maintain a clean appearance around the basin.

    Continental Prime includes a single-lever basin mixer identified by product code COP-CHR-001BPM. The listing describes this version as being supplied without popup waste and with 375 mm long braided hoses. Other variants in the range have different waste configurations, so check the exact model before specifying it.

    The suitability of a mixer depends on the basin and mounting surface. Check the tap-hole arrangement, spout height, outlet reach and plumbing connections before installation.

    Basin Mixers with Click-Clack Waste

    The collection includes a single-lever basin mixer with click-clack waste. This arrangement combines the mixer with a waste mechanism that is operated by pressing the waste fitting, subject to the specific product configuration.

    A click-clack waste should be compatible with the basin's waste opening and plumbing arrangement. Confirm that the required component is included and review the product description for the exact model. Do not assume that all basin mixers in the range include the same waste mechanism.

    Basin Mixers with Popup Waste

    Continental Prime also includes a single-lever basin mixer with popup waste. A popup mechanism allows the basin waste to be operated through its associated control arrangement, depending on the product design.

    Before choosing this version, confirm that the basin is compatible with the waste assembly and that sufficient access is available below the basin for installation and maintenance. Check the product listing for the supplied components and connection details.

    High-Neck Basin Mixer

    The high-neck basin mixer provides additional height compared with a standard basin mixer. Continental Prime includes a single-lever high-neck basin option, which can be considered for certain countertop or vessel basin arrangements.

    The correct tap height depends on the basin's position, rim height and internal dimensions. Measure the countertop and basin before selecting the model. The spout should provide usable clearance while directing water into the bowl rather than towards its edge.

    Bidet Mixer

    A bidet mixer is intended for a bidet installation and should be selected according to the fixture's design and connection requirements. Continental Prime includes a single-lever bidet mixer with popup waste in its product range.

    Check the bidet's tap-hole layout, the required waste configuration and the installation instructions before choosing a fitting. A basin mixer should not be assumed to be a suitable replacement for a bidet mixer because the intended applications and fixture arrangements can differ.

    Continental Prime Bath and Shower Fittings

    Single-Lever Bath and Shower Mixer

    The Continental Prime range includes a single-lever bath and shower mixer. This type of fitting is intended for a bathing installation where the selected mixer configuration suits the planned water outlets.

    Before specifying the product, determine whether the installation serves a bathtub, shower or combined bathing arrangement. Check the mixer type, diverter requirements and connections to ensure that the fitting is compatible with the system.

    The product listing and technical documentation should be used to confirm the configuration. A mixer that looks similar to another model may have different connections or outlet provisions.

    Shower Mixers

    Continental Prime includes shower mixer options for different installation arrangements. The correct product depends on the planned shower setup and the components required to control the water supply.

    Review the product details to determine whether the selected model is intended for the planned installation and whether additional components are needed. The location of the controls, the plumbing route and access for servicing should all be considered before the wall or surrounding finish is completed.

    Exposed Parts for In-Wall Systems

    The range includes exposed part kits for selected single-lever in-wall diverters and manual valves. These components form the visible part of a system in which some plumbing components are installed inside the wall.

    Compatibility between the exposed part and the concealed body is essential. Confirm the precise product codes and installation requirements before purchasing the components. If an existing in-wall body is being retained, verify its model and compatibility rather than assuming that a similar-looking exposed kit will fit.

    Choosing the Right Continental Prime Configuration

    Match the Product to the Application

    Begin by identifying whether the fitting is for a basin, bidet, bath or shower. Each application has specific requirements. Selecting the correct category first helps narrow the range and reduces the likelihood of choosing an incompatible fitting.

    Review Mounting and Connections

    Check whether the product is intended for deck mounting, countertop installation or an in-wall arrangement. Confirm the number and position of mounting holes, connection requirements and any necessary concealed components.

    For renovation projects, examine the existing plumbing before selecting a replacement. Changes to mounting or connections may require additional work.

    Choose the Right Basin Mixer Height

    For basin mixers, compare the tap height and spout reach with the basin dimensions. A high-neck mixer may suit some countertop basins, while a standard mixer may be more appropriate for other layouts.

    The outlet should direct water into the basin's usable area. Refer to product dimensions and installation drawings wherever available.

    Confirm Waste Compatibility

    Continental Prime offers basin mixer variants with different waste arrangements. Determine whether the selected model includes a popup waste, click-clack waste or no waste component. Check the basin opening and the space beneath the basin before finalising the choice.

    Verify In-Wall Compatibility

    For shower controls and other in-wall components, identify the concealed valve body before selecting the exposed part. Check the product codes and installation requirements together. This step is especially important when replacing only the visible components.

    Coordinating Continental Prime with the Bathroom Design

    A coordinated bathroom scheme considers the basin, sanitaryware, shower and visible fittings together. The goal is to create a practical layout with consistent visual details.

    Basins and Sanitaryware

    The basin determines the height, reach and mounting requirements of the tap. Consider the basin and mixer as a pair, and review the sanitaryware collection when planning the rest of the bathroom.

    Shower Fittings

    Coordinate the shower mixer with the planned shower outlets and the overall layout. The selected products must be compatible with the plumbing arrangement and provide the required controls. Explore the shower collection when planning the bathing area.

    Bathtubs and Bath Mixers

    If a bathtub is included, verify that the selected mixer and outlet are suitable for the bath installation. Consider the location of the controls, the bath spout and any hand shower provision. Review the available bathroom products when planning the wider space.

    Accessories and Finishes

    Coordinate the faucet finish with other visible bathroom details where appropriate. Towel rails, robe hooks and shelves should be placed so they remain accessible without obstructing the basin, shower controls or bathing area.

    Installation Considerations

    Before installation, verify the product code, mounting method, dimensions and connection requirements. Use the technical documentation for the selected product to confirm compatibility with the plumbing system.

    For basin mixers, ensure the tap is securely mounted and that the spout aligns with the basin. Check all connections for leaks and test the lever after installation. Where a waste mechanism is included, confirm that it opens and closes correctly.

    For bath and shower mixers, confirm the intended outlets and any diverter requirements. For in-wall products, check the concealed valve body and exposed component compatibility before completing the wall finish. Ensure that the installer has access to the relevant product instructions.

    Product details can differ across models, even within the same range. Always use the current product-specific information to establish the correct installation method.

    Cleaning and Maintenance

    Clean the fitting with a soft cloth and a method suitable for its finish. Avoid abrasive materials and harsh chemicals that could damage the surface. Follow the care instructions provided for the selected product.

    Remove soap residue and water marks from the lever, spout and base. If water flow becomes irregular or a leak appears, follow the product's recommended maintenance procedure. Persistent faults should be assessed by a qualified professional.

    For in-wall systems, avoid dismantling concealed components without the required expertise. Correct diagnosis and compatible replacement parts help maintain the intended operation of the fitting.

    Why Consider Continental Prime?

    Continental Prime offers a broad selection of bathroom fittings, including basin mixers, high-neck basin mixers, waste configurations, bidet mixers, bath and shower mixers, shower mixers and in-wall components. This variety allows products to be selected according to the intended application and installation requirements.

    Jaquar product listings help buyers and specifiers identify individual models and compare their configurations. Before choosing a product, confirm its code, mounting method, finish, dimensions and supplied components.

    The most suitable fitting is one that works with the planned plumbing and sanitaryware while supporting the desired bathroom design. Careful selection helps reduce compatibility issues and creates a more coordinated result.

    Continental Prime Faucet Selection Checklist

    • Identify the intended application: basin, bidet, bath or shower.
    • Confirm the required mounting method and plumbing connections.
    • Compare basin height and spout reach for basin mixer installations.
    • Check whether the selected model includes a popup waste or click-clack waste.
    • Verify compatibility between in-wall valve bodies and exposed parts.
    • Review the product code, dimensions and included components.
    • Coordinate the finish with the wider bathroom scheme.
    • Follow the current installation and maintenance instructions.

    By checking these details before purchasing, you can select a Continental Prime fitting that suits the bathroom layout and the requirements of the installation.

    정보
    • 자쿠아 그룹 소개
    • 미디어
    • 보도자료
    • 추천
    기타 링크
    • 옥편
    • 자쿠아 월드
    • 보증 정보
    빠른 링크
    • 제품
    • 설계
    • 블로그
    • 카탈로그 다운로드
    • 문의하기
    브랜드
    • Artize
    • Jaquar
    • Essco
    앱 다운로드
    • Icon-google
    • apple-icon
    • 개인정보처리방침 및 면책 고지
    • 쿠키 사용
    • 사이트맵
    • GDPR
    • Facebook
    • YouTube
    • Twitter
    • Linkedin
    • 3d Warehouse
    Copyright © 2026 Jaquar South korea. 판권 소유. Powered by nopCommerce.

    *주의: 허위 프로모션 및 제안에 유의하세요

    Jaquar 프랜차이즈 모집 또는 제휴 제안인 것처럼 가장한 허위 프로모션에 유의하시기 바랍니다. 이러한 메시지는 전화, SMS, 카카오톡, Whatapp, 이메일, 웹 링크 등을 통해 전달될 수 있으며, 링크 클릭이나 개인정보 입력을 요구할 수 있습니다.

    해당 웹사이트, 링크 및 제안은 Jaquar가 승인하지 않은 허위·사기성 정보입니다. 이에 응답하거나 개인정보를 제공할 경우 금전적 피해, 신원 도용, 개인정보 악용 등의 피해가 발생할 수 있습니다.

    Jaquar & Company Private Limited는 이러한 허위 제안이나 사기성 활동을 승인하거나 보증하지 않으며, 이와 관련한 어떠한 책임도 부담하지 않습니다. 의심스러운 메시지를 받으신 경우, 공식 웹사이트 또는 고객센터를 통해 신고해 주시고, 반드시 공식 채널을 통해 사실 여부를 확인해 주시기 바랍니다.

    본 채널의 모든 콘텐츠는 Jaquar의 공식 콘텐츠입니다. 저작권법에 따라 해당 영상을 개인 계정에 다운로드하거나 재업로드하는 행위는 엄격히 금지됩니다.

    Call back request
    Captcha
    By sharing my contact details, I authorize Jaquar & its representatives to call me or SMS me. This consent will override any registration for DNC / NDNC.
    (read)

    우리는 더 나은 환경을 제공하기 위하여 쿠키를 사용합니다. 사이트를 계속 이용하거나 상자를 닫을 시 쿠키 사용에 동의하는 걸로 간주하게 됩니다.

    더 알아보기 about our privacy policy